Floodgates

Floodgates comprise of a 25mm thick, boxed steel frame covered by a 7mm thick grey rubberised cover.
A jacking mechanism attached to the rear of the frame allows both the frame and cover to expand telescopically widthways into the walled area (the reveal) immediately in front of the door. Four bolts situated along the bottom edge of the frame are then adjusted to provide a seal along the ground.

Prices start from

£430.00

Standard

Model
FG-STD

Width Range (Weight)
77.0cm > 89.0cm (15Kg)

£460.00

Regular

Model
FG-REG

Width Range (Weight)
89.0cm > 97.5cm (16Kg)

£495.00

Medium

Model
FG-MED

Width Range (Weight)
97.5cm > 113.0cm (16.5Kg)

£520.00

Large

Model
FG-LRG

Width Range (Weight)
119.5cm > 136.0cm (18Kg)

£595.00

These Floodgates are for INWARDS-OPENING doors. If you are in ANY doubt as to what to order please CONTACT US.

If you just need a new JACKET or RATCHET SPANNER for your Floodgate you can purchase these separately.

Prices include VAT, charged at 20%, and delivery to mainland* UK destinations.

*For delivery to remote areas, the Scottish Highlands and Islands, other islands and Northern Ireland please CONTACT US for additional delivery charges

Wider Opening Protection

Stanchion Set

The system comprises two basic parts; a blue, powder coated mild steel upright and, a grey stainless steel ground anchor that the upright bolts on to.

The uprights can be deployed in a matter of minutes and are completely removable, allowing unhindered access in non flood conditions.

Model – STK
One complete stanchion set
Note: Floodgates not included

£350.00

Prices include VAT, charged at 20%, and delivery to mainland* UK destinations.

*For delivery to remote areas, the Scottish Highlands and Islands, other islands and Northern Ireland please CONTACT US for additional delivery charges

Accessories for your Floodgates

Angled 17"ratchet spanner for adjusting your Floodgates

Accessories for your Floodgates

No need to buy a new Floodgate when you’ve misplaced the spanner or the jacket has seen lots of action and needs a new lease of life. You can buy replacement parts from us directly.

Replacement Ratchet Spanner

£12.00

Replacement Jacket to fit:

Standard

Floodgate

Replacement neoprene jacket for a floodgate standard size
Width Range
77.0cm > 89.0cm

£85.00

Replacement Jacket to fit:

Regular

Floodgate

Replacement neoprene jacket for a floodgate regular size
Width Range
89.0cm > 97.5cm

£90.00

Replacement Jacket to fit:

Medium 

Floodgate

Replacement neoprene jacket for a floodgate medium size
Width Range
97.5cm > 113.0cm

£90.00

Replacement Jacket to fit:

Large 

Floodgate

Replacement neoprene jacket for a floodgate large size

Width Range
119.5cm > 136.0cm

£95.00

Prices include VAT, charged at 20%, and delivery to mainland* UK destinations.

*For delivery to remote areas, the Scottish Highlands and Islands, other islands and Northern Ireland please CONTACT US for additional delivery charges

Protecting Airbricks

Ventguard

The Ventguard is a simple to use Glass Reinforced Plastic (GRP) shield that is screwed to the wall surrounding an airbrick. When there is a risk of flooding, it takes seconds to manually insert the quick release bungs into both sides of the Ventguard to make it watertight.

Each Ventguard is manufactured in white but, can be hand painted on site to match the colour of the property. They are available in 2 sizes to protect single and double air bricks:

  • The Single Ventguard measures 330mm x 230mm to cover a standard single airbrick (240mm x 120mm)
  • The Double Ventguard measures 330mm x 345mm to cover a standard double airbrick (240mm x 240mm)
Ventguard Single

Cover a single standard airbrick

£45.00

Ventguard Double

Cover a double-height airbrick

£60.00

SMART AirBricks

The SMART AirBrick has been designed to replace existing airbricks. As a “fit and forget” product  you can relax knowing that it will operate automatically when the waters rise.

The SMART AirBrick is available in terracotta red or stone grey to match your brickwork and has the following dimensions:
W: 213mm H: 62mm D: 58mm

Two SMART AirBricks can be stacked on top of each other to replace double height air bricks.

SMART AirBrick

Brick Red

£70.00

SMART AirBrick

Stone Grey

£70.00

Prices include VAT, charged at 20%, and delivery to mainland* UK destinations.

*For delivery to remote areas, the Scottish Highlands and Islands, other islands and Northern Ireland please CONTACT US for additional delivery charges

Drain Protection

Water and Rodent Valves

The WAR Non Return Valve is easy to fit and operates on 110mm/4″ straight or bent** inspection chamber pipes both clay and plastic.

This valve is a universal product due to its unique design, with a shaped, stainless steel reinforced flap that has an integrated mechanism that allows it to be locked watertight. This revolutionary product offers protection from flooding, rodents, insects and noxious fumes.

Fits both Clay and Plastic 110mm or 4″ pipes.

Universal Fit WAR Valve

£80.00

**It fits 45 and 90 degree inlets on 450mm diameter chamber bases. Not suitable for some 45 and 90 degree inlets on smaller 300mm diameter (or less) chamber bases – only the straight inlets on smaller chamber bases. This is due to the tight angled chamber walls restricting installation and o

Prices include VAT, charged at 20%, and delivery to mainland* UK destinations.

*For delivery to remote areas, the Scottish Highlands and Islands, other islands and Northern Ireland please CONTACT US for additional delivery charges

Ordering from outside the UK…

You can buy our products from one of our International Distributors